Home > Products > Water Pumps > Water Pump For Agricultural Irrigation > S type double-suction pump

S type double-suction pump

  • $700
    ≥1
    Set/Sets
Payment Type:
L/C,T/T
Incoterm:
FOB,CFR,CIF,EXW
Min. Order:
1 Set/Sets
Transportation:
Ocean,Land,Air
Port:
Shanghai,Guangxi,Chengdu
Share:
  • Product Description
Overview
Product Attributes

Model No.150S50 A

BrandGAOFENG

Impeller NumberSingle-Stage Pump

Working PressureLow Pressure Pump

Influent Type of ImpellerDouble-Suction Pump

Position of Pump ShaftHorizontal Pump

Pump Casing CombinedHorizontal Split Pumps

Mounting HeightSuction Centrifugal

ImpellerOpen

UsagePump

MediumChemical Liquid

Head9--140 M

Supply Ability & Additional Information

PackagingWooden case or Frame steel Case

Productivity1100000 sets/year

TransportationOcean,Land,Air

Place of OriginZigong,Sichuan,China

Supply Ability110000 sets/month

CertificateISO9001

HS Code8413709990

PortShanghai,Guangxi,Chengdu

Payment TypeL/C,T/T

IncotermFOB,CFR,CIF,EXW

Packaging & Delivery
Selling Units:
Set/Sets
Package Type:
Wooden case or Frame steel Case

S type double-suction pump

S type double-suction pump can be named by Double-suction Water pump,Chemical Liquid Water Pump or multipurpose single stage double suction pump.

Multipurpose Single Stage Double Suction Pump---Brief introduction

S type pump is the horizontal Centrifugal Pump of single-stage, double-suction and open in the middle. It is used for transporting clean water and other liquids similar to the clear water with physical and chemical characteristics. The liquid temperature should below 80℃. Often call them----Water Pump For Agricultural Irrigation.

The head of pump produced by our company is 9-140 meters, the capacity is 126~7590 cubic meter/hour. The pump is applicable to factory, mining, municipal water supply, power station, hydraulic engineering, the irrigation of farm and draining water-logged with a very wide using range. 


The meaning of Chemical Liquid water pump(e.g 150S50A) 

150---the inlet diameter is 150mm

S------single stage double suction pump

50----Head is 50 m

A-----the code of the impeller



Features and charts of  Double-suction Water Pump

1. Structure features


The intake suction and outlet suction of S type pump are all below the pump axial lead, perpendicular to the axial lead appears horizontal direction, the capsid horizon and in the open double, the pump cover located by the taper pins with external thread. Detach the pump cover and easy to check, no need to detach the intake and outlet pipe and motor. See form the transmission direction it is clock-wise.

The main spare parts are: pump body, pump cover, impeller, shaft, double-suction sealing-ring, shaft-sleeve, bearing parts and coupling-parts etc, besides the material of shaft is quality carbon steel, the others are all cast iron. Using carbon steel or stainless steel is according the requirements of users.

The pump body and pump cover constitute of the workshop of impeller. There is a pipe thread hole to install vacuum gage and manometer on the water outlet flange. At the bottom of intake and outlet flange there set a pipe thread hole for drainage.

At the top of pump cover there set a pipe thread hole to gas leakage.

After the check of static balance of impeller, fix it on the pump shaft by the key, shaft sleeve and sleeve nut at the two sides, the direction of axial force adjusts by the sleeve nut. Make the shape of impeller be symmetry, the liquid gets into the impeller from two sides to balance the axial force, if there remains axial force supported by the single-row radial ball bearing at the end of shaft.

The two side of pump supported by the pump shaft, installed coupling-shaft at the right and directly connect to the motor. (If necessary to deliver by the belt, so need to set a stand.)

The bearing is set in bearing body and installed at the two sides of pump body. Use the butter to lubricate the single-row radial ball bearing.

The double-suction seal-ring is used to reduce leakage of liquid water back into the suction chamber. For wearing parts, spare parts should be replaced after wearing.

Shaft sleeve is for fixing wheel shaft position and protecting shaft and it is wearing component, so spare parts should be replaced after wearing.

Using soft packing seal is to prevent air penetration into the pump and the large amount of liquid leakage. Fitted between the packing rings in the packing, packing compression level must be appropriate. Work a small amount of high-pressure water pump through the pump cover in the open surface of the trapezoidal groove into the packing chamber, which is for water seal.
2.Structure figures




 Multipurpose Single Stage Double Suction Pump

1.casing  2. pump covering  3.impeller  4.shaft  5.key  6.shaft sleeve  7.packing sleeve  8.seal  9.gland   10.single-row radil ball bearing   11.bearing   12.locating  screw   13.bearing gland   14.round nut  15.coulping   16.bearing gear sleeve  17.bearing end covering  18.bearing  nut  19.sealing ring

The pump type table

Chemical Liquid Water Pump

 

 


   Packing and shippment


Double-suction Water Pump
























































































Product Categories : Water Pumps > Water Pump For Agricultural Irrigation

Email to this supplier
  • *Subject:
  • *To:
    Ms. Ivy
  • *Email:
  • *Message:
    Your message must be between 20-8000 characters
Send Inquiry
*
*

Related Products List

Home

Product

Whatsapp

About Us

Inquiry

We will contact you immediately

Fill in more information so that we can get in touch with you faster

Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.

Send